Configuring Docket printer

Open Readysell and navigate to the Workstation settings (Navigation panel > Administration > Workstations).

Select the workstation which the system belong to in the list view and in the detail view click on the General Settings tab.

In the details view, find the section marked Printer Settings. This is where for the details about receipt printer are entered in for Cash draws and other options (Click Here for Cash Draw Set-ups).

1. Docket Printer Type:  This a drop down menu which provides a list of the printer to select from which have been hard coded in the system. The reason we select the printer type which we are using is because the parameter for the print, cut and till pop have been entered into the system. If the printer is not available in the list, please inform the development team to assess and added printer to list. In regards to Draw 2 option, please refer to Cash Draw set-up document.

    Show me

   

2. Docket Printer Name: The name given to the receipt printer used. If you are used a printer which is existed on another pc on the network, Please use the UNC path for the printer name. E.g. R1 on PC1 = \\pc1\r1.