Port forward and firewall configuration

Introduction

Readysell requires certain ports to be open and accessible from the Internet to operate correctly. These ports are required for various integration and monitoring functions. If you are unsure of how to configure your system to open and/or forward the ports, please contact Readysell Support.

Inbound ports

Externally accessible

These ports must be forwarded (using NAT) from your router/firewall to the Readysell server.

Internally accessible

These ports must be accessible from other PCs on your local network. Readysell automatically configures the Windows Firewall to allow access, however if you are using a third-party firewall product on the Readysell server, you may need to unblock these ports. It is highly recommended that these ports not be accessible from outside your organisation.

Outbound ports

Readysell sends outbound messages using these ports. Most routers/firewalls do not block outbound ports, but if you are using a strict outbound port blocking policy, you will need to open these ports.

Inbound IP addresses

If the firewall is being configured based on a whitelisting policy for inbound traffic, Readysell will require the following IPv4 addresses to be whitelisted to operate correctly.