Versions Compared

Old Version 3

changes.mady.by.user Diane Partridge

Saved on

compared with

New Version Current

changes.mady.by.user Herman Wijoyo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1.
Data feeds, such as those form FMAudit can create new machine parts, usually for toners.

The matching procedure

When a message is received from FMAudit the system considers if it would be appropriate to create a new machine part. For example should the system add a new machine part for a toner because FMAudit has sent information about a new toner.

...

Expand

Find the model in FM Audit
If you have an existing product code for this part in readysell, then change the Part # to be the same as the part productid with in Readysell. If you select the right check box withing edit supply, you can update every model with this amended part# id. 

Otherwise the other method would be to go back to readysell, find the supply part as per example TK715 (toner) and in alternate ids insert the id as tk-715 (or what ever supply code is in fm audit)
For quite a few models, the supply name is generic in fmaudit eg Black Toner so you would need to use what is in the Part# field on that model supply.


Expand

also need to insert the ERP ID onto the tab within fmaudit of 'Devices'

The ERP ID (electronic records program) s the machineid within readysell for that machine.
Image Added



Step 2:  Optional, if the steps above have not found a product for the part. Then try to find the matching product for the part (toner)  based on the contents of the OEMPartNo  (Part #) field on the FMAudit message.

...

If the FMAudit messages are not matching to products as you expect. Then look at the content of the supply name and OEMPartNo fields on a FMAudit message. Then trace the matching process through the logic above. You should be able to identify why the system picked the product it did to be used for the new machine part, if any.


Once FMAudit is set up with all the devices and supply settings, contact Readysell to enable FMAudit to sync to Readysell


2.
Data feeds, such as those form Print Audit can create new machine parts, usually for toners.
Step 1 in Product module :
Add Custom Field : "PrintAuditMachineID" with value of list of machines seperated by comma
Add Custom Field : "PrintAuditToner" with value of toner name in Print Audit response, such as Yellow, Magenta, etc 

Step 2 : Readysell will find matching Machine by Machine ID from custom field above in the Product and find matching Machine Part Product with that Product, if found : 
Create a new Product Part and Create or Find a Machine Part matching that machine and Product and update the toner level


3.   
Data feeds, such as those form 3 Manager can create new machine parts, usually for toners.

Readysell will find Machine Part Product by : 
-Machine's Meter Type Code : Mono for black toner or Colour for colour toner (nothing for Waste Toner)

-Part's Product Name contains toner name such as black, yellow, cyan, magenta, etc Or waste (for Waste Toner)

-Part's Actual End Date is none


Related : 
3 Manager : Integration with 3 Manager